Vickers Pumps
Among all hardness testing Vickers methods, the Vickers test is preferred for sintered metal due to its precision and adaptability. This allows for accurate measurement of the matrix hardness while minimizing errors caused by surface porosity. Industrial applications require industrial-strength hydraulic systems—like those built with Danfoss piston pumps. A Vickers hardness tester is the ideal solution for precision hardness measurement of small, thin, or delicate materials.
Vickers Hardness Test
Vickers was formed in Sheffield as a steel foundry by Edward Vickers and his father-in-law George Naylor in 1828. Naylor was a partner in the foundry Naylor & Sanderson and Vickers’ brother William owned a steel rolling operation. Edward’s investments in the railway industry allowed him to gain control of the company, based at Millsands and known as Naylor Vickers and Company. The Vickers name lived on in Alvis Vickers, until the latter was acquired by BAE Systems in 2004 to form BAE Systems Land Systems. Airflex industrial clutches and brakes are world-renowned for their superior performance, long life and high quality. In 1927, Vickers merged with the Tyneside-based engineering firm Armstrong Whitworth to form Vickers-Armstrongs.
- {
- The load is applied for a standard period of about 10 to 15 seconds, and the two diagonals of the indentation created are measured using a microscope.
- The hardness of a material can also be expressed in terms of the load used, for example, HV5 means the hardness calculated for a 5kg load.
- This indenter is applied onto the surface of the test material with force from a load, which ranges from a few grams to 100 kgf.
- In 1927, Vickers merged with Tyneside based engineering company Armstrong Whitworth to become Vickers-Armstrongs.
- For example, the load applied ranges between 1 gf to 120 kgf, which depends on the material being tested.
- The indentation made by using the indenter must have a properly defined shape to be able to be measured.
|}
{
|}
{
|}
Step 1 – Applying the Test Load
The Vickers test method involves pressing the indenter into the test material and measuring the diagonal lengths of the indentation left after the load is removed. The basic principle, as with all common measures of hardness, is to observe a material’s ability to resist plastic deformation from a standard source. The unit of hardness given by the test is known as the Vickers Pyramid Number (HV) or Diamond Pyramid Hardness (DPH). The hardness number can be converted into units of pascals, but should not be confused with pressure, which uses the same units.
- The unit of hardness given by the test is known as the Vickers Pyramid Number (HV) or Diamond Pyramid Hardness (DPH).
- A Vickers hardness tester is the ideal solution for precision hardness measurement of small, thin, or delicate materials.
- Calculating the hardness of the material is straightforward using the above mentioned formula, and the Vickers hardness is expressed in this form xxxHVyy or xxxHVyy/zz.
- A Vickers hardness tester is used to measure the hardness of materials by applying a pyramid-shaped diamond indenter under a controlled force.
- The Vickers name lived on in Alvis Vickers, until the latter was acquired by BAE Systems in 2004 to form BAE Systems Land Systems.
- In 1960, the aircraft interests were merged with those of the Bristol, English Electric and Hunting Aircraft to form the British Aircraft Corporation (BAC).
{
|}{
|}{
|}
Vickers
In 1929, the acquired railway business was merged with that of Cammell Laird to form Metropolitan Cammell Carriage & Wagon. In 1928, the Aviation Department became Vickers (Aviation) Ltd and soon after acquired Supermarine, which became the “Supermarine Aviation Works (Vickers) Ltd”. 1929 saw the merger of the acquired railway business with those of Cammell Laird to form Metropolitan Cammell Carriage & Wagon. In 1927, Vickers merged with Tyneside based engineering company Armstrong Whitworth to become Vickers-Armstrongs.
Vickers Hardness Testers
{
- These pumps go beyond expectations, providing the reliability and efficiency demanded by your operations.
- In 1927, Vickers merged with the Tyneside-based engineering firm Armstrong Whitworth to form Vickers-Armstrongs.
- Airflex industrial clutches and brakes are world-renowned for their superior performance, long life and high quality.
- As a worldwide leader, Vickers Hydraulics designs and manufactures a comprehensive line of reliable, high-efficiency hydraulic systems and components.
- Edward’s investments in the railway industry allowed him to gain control of the company, based at Millsands and known as Naylor Vickers and Company.
- The Vickers test follows standards such as ASTM E384 or ISO 6507, and can be very useful for comparative studies.
{
|}
{
|}{
|}
|}
The indenter used is diamond-shaped with a square base, and the opposite faces have an angle of 136° between them. This indenter is applied onto the surface of the test material with force from a load, which ranges from a few grams to 100 kgf. A Vickers hardness tester is used to measure the hardness of materials by applying a pyramid-shaped diamond indenter under a controlled force.
Vickers Hardness Testers for Precise and Versatile Applications
Calculating the hardness of the material is straightforward using the above mentioned formula, and the Vickers hardness is expressed in this form xxxHVyy or xxxHVyy/zz. Where xxx stands for the Vickers hardness number, yy is the load, and zz is if the dwell time is beyond the approved standard of 10 to 15 seconds. For example, the load applied ranges between 1 gf to 120 kgf, which depends on the material being tested. The indenter must contact the specimen at a controlled velocity between 15 and 70 μm/s, not exceeding 0.2 mm/s.
